2 Document: IV_MCEE_2016_11_22
Table of contents
1 General 4
2 Technical data 4
2.1 General 4
2.2 Prestaties van de toestellen 4
2.3 Correction factors for other hot water supply- or entering air temperatures 4
3 Operating and setting 5
3.1 General 5
3.2 The control panel 5
3.2.1 Basic screen 5
3.2.2 Locking 5
3.3 Changing settings 5
3.3.2 Low, average and high speed 6
3.3.3 Relationship between the air temperature and air speed, fan curve 6
3.3.4 Setting the language 7
3.3.5 Setting the time and date 7
3.3.6 Screen cleaning 7
3.3.7 Installer’s menu 7
3.3.8 Information screens 7
4 Installation 8
3.1 General 8
3.1.1 Transport damage 8
3.1.2 Packaging 8
3.1.3 Location 8
3.1.4 Minimal clearance 8
3.1.5 Transport on site 8
3.2 Electrical installation 8
3.2.1 Electrical connections 8
3.2.2 Thermostat 8
4.3.3 Advanced options 9
4.4 Installing the hot water supply lines 9
4.4.1 Hydraulic installation, simple version 9
4.4.2 Hydraulic installation, extended version 10
4.5 Installing the ducting system 10
4.5.1 Fitting the supply ducts 10
4.5.2 Fitting the return air ducts 10
4.6 Commissioning 10
4.6.1 Switching the apparatus ON an OFF 10
4.6.2 Setting the air temperature 10
4.6.3 Settingtheairow 10
5 Maintenace 11
5.1 Maintenance by the end user 11
5.1.1 Cleaningtheairlter 11
5.1.2 Cleaning the casing 11
5.1.3 Cleaning the display 11
5.2 Maintenance by the installer 11
6 Electrical wiring 12
7 Warranty 13
7.1 General 13
7.2 Scope and duration of the warranty 13
7.3 Damage that is not covered by the warranty 13
7.4 Not covered under warranty 13
7.5 Repairs 13
7.6 Service-parts 13
8 Statement of compliance 14
To Next Page
Loading...