To recharge the battery, follow the instructions below:
1. Connect the charger base plug into a socket.
2. Put the radio or the battery itself in the charger base as image below:
3. Make sure that the radio or the battery was embedded correctly in the charger base.
4. When recharging, the led light placed in the charger base front part will be red.
5. The total recharging time is about 3 hours. When the recharging finishes, the led light
will be green.
ATTENTION: Just recharge the battery when it is completely with no power.
Recharging the battery when there is no need may causes damage to it.
INSTALLING / UNISNTALLING THE BATTERY
To install / uninstall the battery, please, follow image below:
To Next Page
Loading...