EasyManua.ls Logo

Multilaser TV003 - Using the Product; Transmitting a Message; Additional Functions

Multilaser TV003
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Manual TV003
USING THE PRODUCT
Turning the product on
Rotate the button ON/OFF to the left. You will hear a “click” and a massage that
indicates the operation of the radio.
Adjusting the Volume
Keep pressed the Try-on button and at the same time rotate the Volume Control Button.
Rotate it to the left to high the volume and to the right to down the volume. Release the
Try-on button when finding the desired volume.
Selecting the Channel
Rotate the Channel Change button to the left to select the a channel among the 16
available channels.
ATTENTION: All The Radios Must Be Tuned On The Same Channel.
Transmitting a Massage
To transmit a massage, press the PTT button and while pressing it, speak though the
microphone with your normal tone of voice.
The Indicator led light will be read during the transmission.
For a better voice capitation, speak in 2 or 3 inches of distance from the microphone.
ADDITIONAL FUNCTIONS
Silence Mode
The Silence Mode will turn the speakers off when there’s no signal.
Low Battery Warning
When the battery level is low, there will be an audible warning and the indicator led
light will be red. The battery must to be recharged as soon as possible.