Multilin PROTECT 4A-120 - 1.4 Order Code

5
PHASE SENSING CURRENT TRANSFORMERS
Any standard 5 amp secondary 5 VA or greater CT can be
used. 3 phase CTs per PROTECT 4A are required. 1 amp
CT operation available on special order.
PART NO. DESCRIPTION
CT-100:5 100:5
CT-150:5 150:5
CT-200:5 200:5
CT-250:5 250:5
CT-300:5 300:5
CT-500:5 500:5
CT-1000:5 1000:5
1.4 ORDER CODE
TABLE 1-2 RELAY ORDER CODE
RELAY
PROTECT 4A — 120
PART NO. DESCRIPTION
PROTECT 4A Standard relay
— 120 120 VAC control voltage
— 240 240 VAC control voltage
GROUND FAULT CURRENT TRANSFORMERS
1 required for ground fault sensing:
PART NO. DESCRIPTION
HGF3 3½" Window 2000:1
HGF5 5½" Window 2000:1