Multimetrix DMM 107 - Page 34

34
A 40 mA, 400 mA, 10 A
Resolution (A) 10 µA, 100 µA, 10 A
Accuracy ± 1.2% + 3 counts, 1.2 + 3, 2.0 + 5
A 40 mA, 400 mA, 10 A
Resolution (A) 10 µA, 100 µA, 10 A
Accuracy ± 1.5% + 5 counts, 1.5 + 5, 3.0 + 5
BP 40 Hz to 1000 Hz
Protection By F 500 mA, 250 V fast blow fuse
10 A calibre unprotected
V 400 mV, 4 V, 40 V, 400 V, 600 V
Resolution (V) 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
Accuracy ± 0.7% + 2 counts
Input impedance
10 MΩ
V 4 V, 40 V, 400 V, 600 V
Resolution (V) 1 mV, 10 mV, 100 mV, 1 V
Accuracy ± 0.8% + 3 counts
BP 40 Hz to 500 Hz
Input impedance
10 MΩ
Ω
400, 4 k, 40 k, 400 k, 4 M, 40 M
Resolution (Ω)
0.1, 1, 10, 100, 1 k, 10 k
Open-circuit volt.
0.25 V
Accuracy ± 0.9% + 2 counts, 0.9 + 2, 0.9 + 2, 2 + 2, 5 + 2
Test voltage < 1.5 V
Ω
400
Resolution
0.1 Ω
Buzzer
< 50 Ω ± 25 Ω; U with open circuit < 3.4 V
No-load voltage 0.5 V
Protection 250 V DC or RMS
4 nF, 40 nF, 400 nF, 4 µF, 40 µF, 200 µF
Resolution 1pF, 10pF, 0.1nF, 1nF, 10nF,100 nF
Open-circuit volt.
800 mV
Accuracy ± 3.0% + 3 counts
Protection 250 V DC or RMS
Hz 9.999, 99.99, 999.9, 9.999 k, 99.99 k,199.9 kHz
Resolution 0.001, 0.01, 0.1, 1, 10, 100 Hz
Accuracy ± 2% + 5 counts
1.5 % + 5, 1.5 + 5, 1.5 % + 5, 2.0 % + 5
% 99.9
Resolution (Ω)
0.1 %
Duty
cycle
Accuracy 4.5%