Multiplex Albi 4 14-2003-05 User Manual

21
Section 3
ALBI ALL STILL, ALBI FLEX AND ALBI FLEX PLUS SET UP AND
PROGRAMMING INSTRUCTIONS
When in programming mode, the keypad is used to adjust and set the various options
for dispense of still and carbonated drinks. The menu appears in the order shown
below:
• Enable\Disable compressor, carbonator pump, and dispense valve.
• Priming of syrup pumps.
• Brix ratio setting of syrups, carbonated water and still water.
• Display of syrup pump total run time in minutes.
• Enable\Disable the dispense of carbonated and still water.
• Settingavourbuttons1to4aseitherstill,carbonatedordeactivate.
• Settingthenozzlewashfeatureon/o.
1. Accessing programming mode and button operation
Before commencing programming and brixing, ensure that the mains water, CO2 and
syrup bag in boxes are connected.
Indispensemode,buttons1-4areusedtodispenseavoureddrinksandthebutton(s)
below dispenses still and carbonated water.
In programming mode, the button numbers in the diagrams above correspond to the
numbers shown in the instructions below
Where H20 is shown as an option, pressing either the still or carbonated water buttons
do the same thing.
STILL/
SODA
1
2
3
4
SODA
STILL
1
2
3
4
1
2
3
4
SODA
STILL

Multiplex Albi 4 14-2003-05 Specifications

General

Brand	Multiplex
Model	Albi 4 14-2003-05
Category	Dispenser
Language	English