Multiplex Albi 4 14-2003-05 - Dispense Font Cleaning

37
Section 4
Turntheunit“o”atthemainssupplysocketand
unplug the mains plug. Remove the IEC kettle lead
plug from the back of the unit.
Turntheco2supplyoattheprimaryregulator
Turnowatersupplytounit
Remove drip tray from unit.
Behind the drip tray is the screw for removing
the splash back. The splash back needs to
be removed to gain access to the dispense
solenoid.
ALBI 4 –DISPENSE FONT CLEANING - “INSTALLED UNITS”
Before “ANY” work is carried out on MBS equipment the following rules must be
adhered to.
1. “NEVER” work on any “LIVE” electrical equipment!
2. Switchtheunitoatthemainssupplysocket!
3. Unplug the unit from the mains supply socket and ensure that the plug cannot be
accidently plugged back into the mains while work is being carried out on the unit!
4. “ALWAYS” wear the appropriate “PPE” for the task being carried out!