Multiplex Albi 4 14-2003-05 - Page 29

29
Section 3
Accessing Carbonated and Still Water Flow
Adjusters.
Toaccesstheowadjusters,rstremovethe
drip tray to allow access to the screw that
retains the splash back moulding.
Undo the single splash back retaining screw
and remove the splash back by pulling it from
the bottom and lifting it up.
Therstimageshowsthesplashback
removed
The second image shows access to the
adjusters from underneath.
Looking from front of unit:
Left adjuster - Still water
Right adjuster – Soda water