Multiplex COCKPIT SX Supplementary Information

9
5. Miscellaneous
• Active servo mixers and control mixers are now indicated by an exclamation mark “!”.
• Improved swipe routine for telemetry display.
• Throttle trim also reversed when throttle is reversed.
• All MULTIGYRO values now supported in Heli mode.
• Expanded French audio file “093_phase”.
• Transmitter control settings displayed in transmitter control calibration menu.
6. Update
The COCKPIT SX M-LINK software can be updated as
follows using the included MINI-USB cable and the free
software MULTIPLEX launcher.
MULTIPLEX launcher can be downloaded free of charge at
www.multiplex-rc.de in the software download section.
Performing the update:
· Ensure that your transmitter is fully charged.
· Install the MULTIPLEX launcher.
· Switch on your transmitter.
· Insert the USB cable into your PC and transmitter
The selection menu “USB mode” appears.
· Select “USB data connection”.
· Start the MULTIPLEX launcher.
· Select “Cockpit SX Manager” on the launcher.
· Press the update symbol.
· Select the appropriate firmware and press “Install”.
· Follow the further instructions of the MULTIPLEX launcher.
· Carefully check all your model and transmitter settings after
the update.


Multiplex COCKPIT SX Specifications

General

Brand	Multiplex
Model	COCKPIT SX
Category	Remote Control
Language	English