EasyManua.ls Logo

Multiplex EUROPA mc Series User Manual

Multiplex EUROPA mc Series
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Multiplex EUROPA mc Series and is the answer not in the manual?

Multiplex EUROPA mc Series Specifications

General IconGeneral
BrandMultiplex
ModelEUROPA mc Series
CategoryRemote Control
LanguageEnglish

Summary

The Basics

Safety Guidelines

Essential safety precautions for operating radio-controlled models.

First Time Setup

Charge Batteries

Guide for charging transmitter and receiver batteries.

Troubleshooting Common Issues

Addresses common problems like no response, incorrect directions, and range issues.

Flying Fixed-Wing Models

Control Assignment (MODE)

Explains stick mode and function mapping for flight controls.

Reverse Servo Direction

Step-by-step guide to reversing servo rotation.

Altering Control Surface Travels

Guide for adjusting servo travel and centre positions.

Boating Operation

Twin-Motor Boat Example

Detailed setup for a twin-motor boat using mixers.

Servo Adjustment (SERVO Menu)

Servo Adjustment Procedure

Outlines the process for adjusting servo travel, center, and direction.

Centre and Travel Adjustment

Detailed steps for setting servo center and travel limits.

Servo Reversing

Instructions on how to reverse servo direction.

Dual Rate (DR MN Menu)

Set Dual Rate Travel

Steps to configure travel limits for Dual Rate.

X-Mixer (X-MIX Menu)

X-Mix Functionality

Explains the cross-mixing function for two controls to two servos.

Y-Mixer (Y-MIX Menu)

Y-Mix Functionality

Explains mixing two inputs to a single servo, like Combi-Switch.

MULTInaut Top System

Safety Notes

Crucial safety precautions for the MULTInaut system.

Install Transmitter Module

Detailed steps for installing the MULTInaut transmitter module.

Modifying the Transmitter

Check Control Connections

Procedure to verify correct connection and orientation of controls.

Calibrate Controls

Steps for calibrating sticks, trims, and other controls.

EUROPA mc 1005 Specifics

System Care and Service

Interference Suppression

Methods to prevent interference from ignition systems.

Range Testing Procedure

Essential steps for performing a safe and effective range check.

Related product manuals