To Next PageTo Next Page
Need help?Do you have a question about the Multiplex FunCub and is the answer not in the manual?
General| Wingspan | 1400 mm |
|---|---|
| Recommended Battery | 3S 2200mAh LiPo |
| Channels | 4 |
| Servos | 4 |
| Material | ELAPOR |
Check model security, motor temperature, and propeller clearance before flight.
Never fly towards or over people or animals.
Check all parts against the Parts List and identify recommended components.
List of essential tools required and key technical specifications of the model.
Use specific adhesives; work in well-ventilated areas for health and safety.
Steps for assembling fuselage, servos, and control linkages.
Attaching the tailplane, fin, rudder horn, and tailwheel unit.
Preparing and attaching the main undercarriage unit to the fuselage.
Gluing wing spars and preparing ailerons and landing flaps.
Installing servos for ailerons and landing flaps and connecting pushrods.
Installing the power set, motor bulkhead, and setting motor thrust angles.
Mounting the motor, canopy latches, flight pack, receiver, and aerial.
Setting control surface throws and applying decorative decals to the model.
Balancing the model and performing essential pre-flight checks.
Guidance on initial test flights, hand-launching, and general flying advice.
Emphasizes safe piloting, insurance, and regular model upkeep.
List of major aircraft components like fuselage, wings, tailplane, and undercarriage.
Details of small hardware, servos, linkages, motor mount, and wire/rod sets.
List of parts for the main and tail landing gear systems.
Part numbers for wing panels and the complete tail set.
Part numbers for fuselage shells, snakes, and the canopy.
Part number for the carbon fiber spars and joiners.
Part numbers for the decal sheet and the small items set.
Part numbers for the main undercarriage, landing flap hinges, and wheels.
