ga6HR/6HRS
1. Place main circuit breaker (Figure 26) in the
position.
Figure 26. Main Circuit Breaker (OFF)
2. Place idle control switch (Figure 27) in the position.
Figure 27. Idle Control switch (OFF)
3. Let engine run at idle with no load for 2-3 minutes.
4. To shut-down the engine, place the generator's
operation switch (Figure 28) in the F position).
Figure 28. Operation Switch (OFF)
ON
OFF
5. Place engine fuel valve lever (Figure 29) in the
position.
Figure 29. Engine Fuel Valve Lever (OFF)
6. Remove all loads from the generator.
1. Place operation switch (Figure 30) in the position.
Figure 30. Operation Switch (Emergency)
OFF
SHUTDOWN
To Next Page
Loading...
