Multistack MS010XC - Chiller Arrangement and Components; Standard Modular Chiller Arrangement; Total Access Modular Chiller Arrangement

5
Unit
Nameplate
High Pressure
Transducer
High Voltage
Panel
Isolation/Disconnect
Switch
Buss Bar
Duct
Entering Chilled
Water Header
Leaving Chilled
Water Header
Evaporator
Filter/Strainers
Leaving
Condenser
Water
Header
Entering
Condenser
Water
Header
Scroll Compressors
Condenser
Expansion
Valve
Liquid Line
Sight Glass
Low Pressure
Transducer
Low Voltage
Panel
Standard Modular Chiller Arrangement
Total Access™ Modular Chiller Arrangement
Multistack’s Total Access option makes maintenance and serviceability even easier by placing heat
exchangers at the outside of the module frame. Manual i
solation valves are factoryinstalled (Total
Access units only) between the heat exchangers and water supply mains for heat exchanger isolation and
removal without the need to remove a module or shut down the entire chiller while allowing access to all
serviceable components.
High Voltage
Panel
High Pressure
Transducer
Evaporator
Expansion
Valve
Low Voltage
Panel
Isolation/Disconnect
Switch
Buss Bar
Duct
Condenser
Filter/Strainers
Scroll Compressors
Low Pressure
Transducer
Isolation
Valve
Condenser