PRODUCT OVERVIEW
Conduit
®
AP MTCAP3 Hardware Guide for North America 5
Chapter 1 – Product Overview
Overview
Conduit AP (MTCAP3) connects thousands of IoT assets to the cloud using the LoRaWAN
®
protocol. It expands LoRa
network coverage to difficult to reach areas and is capable of packet forwarding user data between LoRa end
devices and a centrally located network server on the cloud, in a data center, or a public network.
Note: Check for an updated version of this document at https://www.multitech.com/brands/multiconnect-
conduit-ap.
Package Contents
For models with all internal antennas For models with an external LoRa antenna.
Your device ships with the following:
# Description Quantity
1 Conduit AP Access Point 1
2 RJ45 Ethernet cable 1
3 5 Volt, 2.5 Amp power supply 1
4 Mounting bracket 1
5 LoRa antenna (models with external antenna only) 1
Not pictured Mounting feet set 1
Quick start 1
Important: Contact MultiTech Systems if a replacement power supply is needed. Using a different power
supply may damage the device and voids the warranty.
To Next Page
Loading...
