REGULATORY & SAFETY INFORMATION
Conduit
®
Cat 4 for North America MTCDT-L4N1 Hardware Guide 27
Chapter 5 – Regulatory & Safety Information
47 CFR Part 15 Regulation Class B Devices
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Interference Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
FCC Notice
The MultiTech Conduit is an open embedded development product. Configurations of this product may optionally
contain a sub GHz radio technology which MultiTech has certified for compliance with US and Foreign compliance
bodies including FCC, R&TTE and others. (e.g. FCC 15.247:2015 & IC RSS-210:2010).
MultiTech provides software code meant to operate the radio to a level that maintains compliance with the
operating modes under which these radio devices were certified. To ensure this level of compliance, the software
code is provided in binary form only. Users are prohibited from making any changes that affect the operation of
the radio performance. Accessing or controlling the radio through any means other than the provided binary
software will require the user to obtain their own intentional radiator license from the certification body governing
their locality, as all pre-certification provided withConduit IP67 Series 200 Base Station. Conduit mDot will have
been made invalid.
MTSMC-L4N1 and MTSMC-L4N1-U
FCC Parts 22H, 24E, 27, and 90
FCC Identifier: RI7LE910CXNF
Equipment Class: PCS Licensed Transmitter
Notes: WCDMA and LTE Wireless Module
To Next Page
Loading...