Multitech MultiModem MT5600ZDX - Page 3

Quick Start Guide
Getting Started
This guide shows you step-by-step how to set up your Multi-Tech
MT5600ZDX or MT5600ZDXV modem. For detailed information on how
to install, test, and use your modem, see the complete User Guide on
CD-ROM provided with your modem.
What You Will Need
Before starting, make sure you have everything you will need.
We supply
 An MT5600ZDX data/fax modem or an MT5600ZDXV voice/data/
fax modem
 A DC power transformer
 One RJ11 phone cable
 A printed Quick Start Guide (this manual)
 An system CD containing modem drivers, communications software
(PhoneTools), and a complete User Guide
 Four vinyl gripper feet for the bottom of the modem
You supply
 A computer with an available serial port. The processor speed
should be at least 75 MHz in order to take full advantage of the
ZDXVs telephony features.
 A shielded RS-232 serial cable with a male DB-25 connector on
one end and a connector to match your computers serial port on
the other end.
 A nearby AC power outlet
 A nearby phone jack
 (Optional) If you want speakerphone functions along with the
ability to record sound or .WAV files through the sound card at
the same time, you will need:
 One stereo PC microphone
 One stereo male-to-male patch cord
 One sound card
 Speakers
1