Need help?Do you have a question about the Multitech MultiModem II MT5600BA-V92 and is the answer not in the manual?
Details the modem's capabilities, including leased line support and dial backup features.
Provides critical safety precautions for connecting and using the modem with telephone lines.
Information on where to find developer guides for AT commands and fax functionality.
Lists the modem's hardware and performance specifications, including speeds, compatibility, and physical attributes.
Step-by-step instructions for physically connecting the modem to a computer and telephone line.
Guide for installing necessary software drivers for the modem, particularly for Windows operating systems.
Instructions for configuring the modem's region or country code for proper operation and compliance.
How to use AT commands for modem configuration and operation via a terminal program.
Overview of the modem's front panel, including LCD, LEDs, and buttons for status and configuration.
Details on configuring fundamental modem settings like line type, error correction, and dialing.
Covers advanced settings such as RS-232, dial backup, callback security, remote config, and diagnostics.
Procedures for configuring the modem for both two-wire and four-wire leased line connections.
Configuration steps for the dial backup feature and setting up leased line restore functionality.
Steps to establish and use remote configuration for managing modems over a network.
Instructions on how to modify the password used for remote modem access.
Guide to altering the escape character for remote configuration to enhance security.
How to enable and configure callback security, including password and phone number assignments.
Steps for initiating a call to a modem that has callback security enabled.
A reference to AT commands used for managing callback security features.
Information on serial port definitions and setup for using the modem with Linux systems.
Procedures to test and verify the modem's communication and functionality within a Linux environment.
Guide for setting up a dial-up internet connection using the modem and Linux GUI.
Solutions for problems where modem LEDs do not light up, indicating potential power issues.
Troubleshooting steps for modems not responding to commands or failing to establish a dialing connection.
Guidance for resolving issues related to modem disconnects during online sessions or failure to answer calls.
Tips for addressing slow file transfers, data loss, or garbled characters during modem communication.
Steps to resolve issues when the Caller ID feature is not functioning correctly with the modem.
Details compliance with US Federal Communications Commission rules for radio frequency devices.
Outlines requirements and compliance standards set by Industry Canada for telecommunications equipment.
Information regarding European Community directives for electromagnetic compatibility and electrical safety.
Environmental compliance information, including WEEE and RoHS directives, and substance content.
How to check the current firmware version installed on the modem.
Instructions for obtaining the latest firmware files and the Flash Wizard utility.
Step-by-step guide for updating the modem's firmware to improve performance or add features.
Detailed description of the pin assignments for the modem's RS-232 serial port connector.
Visual guides for common RS-232 and leased line cable pinouts for proper connectivity.
To Next Page
General