Configuring the MultiTech rCell 100 Series
cellular modems for use with TopView® SMS
Notification
Updated: June 3, 2020
View the latest version of this document:
If this document is available through your TopView installation or was previously downloaded you can
view the latest version here.
Recent document updates:
• June 3, 2020
o Firmware 5.2.1 released
o Updated support information for LNA7 modem.
o Warning and link to MultiTech information regarding changing the SIM card
o “Verify connection to cellular service” section added
• May 21, 2020
o Support for LNA7 modem with SMS format and TopView 6.34
o SIM inserted status for LNA7
o Warning to restart modem if SIM removed/inserted while power on
• May 4, 2020
o Enable SSH for time sync from TopView machine for TopView 6.34 and later.
Enable or disable time sync on modem (SNTP).
• April 10, 2020
o Server 2008/2012: HTTPS and enable TLS 1.1 and 1.2 additional steps required
o HTTPS certificate and connection: using DNS name instead of IP address
• March 30, 2020
o “SIM inserted”, “SIM connected” issue with new LTE modem version
• March 11, 2020
o Firmware 5.1.4 tested for older modem models (MTR-LAT1 and MTR-LVW2)
• March 2, 2020
o Added support information for new rCell LTE modem MTR-LNA7
• December 13, 2019
o Enable TLS versions 1.1/1.2 for successful HTTPS in Windows 7, Server 2008, Server
2012
• November 25, 2019
o HTTPS requirement for latest modem firmware
To Next Page
Need help?
General