Restart and verify
We want to verify that you entered and stored the correct settings. Sometimes you may enter a setting
but forget to click [Submit].
SAVE AND RESTART > then click [OK] to restart the cellular modem
Browse the previously changes settings and make sure that they are set correctly.
Send test SMS from TopView
• Start the TopView Configurator
• Open an existing configuration or start a new configuration
• From the left menu select “Email-SMS Notification” then click [Configure]
• Select “Outgoing SMS Settings” tab
o Select “Use modem via HTTP”
o Host:
▪ Http or Https: based on how you configured the cellular modem in previous
steps. We recommend HTTPS
▪ Ipaddress: the configured IP address or DNS name of the cellular modem
o Username: the username for the cellular modem
o Password: the password for the cellular modem
o Test the connection
▪ Click [Test modem]
▪ If successful you should see modem information displayed
o Send a test SMS message
▪ Message: leave the default message or change to the desired test message
▪ Phone #: enter the recipient SMS number
▪ Click [Send test SMS message]
Failure: “The underlying connection was closed: An unexpected error occurred on a
send”
If your test SMS send fails with this message and you are using HTTPS on Windows 7, Windows 2008, or
Windows 2012 see “HTTPS on Windows 7 SP1, Server 2008 R2SP1, Server 2012”.
To Next Page
Loading...
