Web Configuration
Log into the device
Open your web browser and enter the address
http://192.168.2.1 or https://192.168.2.1
Firmware version 4.0 and above:
• Choose a username and password
Firmware Version 3.7 and below:
• Username: admin
• Password: admin
Making changes: restart required?
When you apply changes to the modem using the web configuration tool, some changes will require
that you restart the modem while others are applied without a restart prompt.
If you have configured modem settings yet are still having problems with the modem, we recommend
that you restart the modem to ensure that the most recent changes are loaded.
To restart the modem from the web configuration tool:
COMMANDS > RESTART DEVICE
To Next Page
Loading...
