Multitech MULTIMODEM MT5634ZBA-USB - Quick Start Guide

MT5634ZBA-USB Quick Start Guide
9
8. Windows ME will now detect an “Unknown Device” and
begin another Add New Hardware Wizard, again asking
“What would you like to do?”
Choose “Specify the location of the driver (Advanced)”
and click Next.
9. At the next screen (the Windows will search for new
drivers screen), uncheck the “Removable Media” button
(if necessary) and check “Specify a location.” Click Next.
10. Transient screens will appear while files are being
copied.
The Windows driver file search screen appears. Click
Next.
11. After files are copied, a completion screen appears.
Click Finish to complete the installation of this the
second driver. The wizard will close.
12. Remove the MultiModem USB CD from the computer’s
CD drive.
13. Test the operation of your modem by registering it online
at http://www.multitech.com/register.
Installation in Windows 98
1. Power up your Windows 98 system.
2. If you have not already done so, make all the necessary
connections.
3. Insert the MultiModem USB CD into your CD drive.
4. Windows will detect that the new modem is present and
launch the Add New Hardware Wizard. The first screen
indicates that the wizard will search for a USB driver.
5. The message
What do you want Windows to do? displays.
Verify that the
Search for the best driver for your device
(Recommended)
option is selected and click Next.