MTRA-FSP Installation & Operation Manual
Page 14 of 16 00242600-MTRA-FSP_Manual.doc
7 Manual (Hand) and Off Inputs
The MTRA-FSP can manually operate a pump using pushbuttons wired into the
Manual (Hand) input and the Off input.
7.1 Manual Operation of Pump (Hand)
Manual pump operation works as follows:
• Pushing the Manual (Hand) button will start the pump. The pump will
continue to operate until the Off button is pushed, regardless of level.
• After the Off input has been de-activated, the MTRA-FSP will revert
back to automatic operation.
To Next Page
Loading...
Need help?
General