Page
13
of
21
IDS001 Document Scanner User Manual
Version 1.00
Figure 3-6 White Calibration
5) When the red light turns off, slide the scanner smoothly on the white paper until the green light turns off.
6) Restart the scanner.
Note: If the “ERR” red light is flashing and cannot be scanned. It may be that you did not follow the above
operation or missed a step when you calibrate the white balance. Please follow the above operation to calibrate
again.
White Balance Calibration Tutorial video: https://munbyn.biz/001c
To Next Page
Loading...
