Page7of17
IMC08 Frequently Asked Questions
Version 1.02
Figure 2-5 Upper Sensor
Note: For the CIS sensors, it is recommended to used cleaning cloth to clean them, as shown in the following
figures.
c) Close the cover and finish the machine cleaning.
2.3. How to remove a stuck banknote or bill?
2.3.1. Bill was stuck in the feeding port (PS1 Error)
If the bills are stuck inside the feeding port, please turn off the machine and rotate the banknote processing wheel
down.
CAUTION: ALWAYS ENSURE MACHINE IS OFF BEFORE PUTTING HANDS/FINGERS NEAR THE
PROCESSING WHEEL OR SLOT.
Figure 2-7 PS1 Error
To Next Page
Loading...
