To Next Page
A
Ana SmithJul 28, 2025
What to do if my MUNBYN Banknote Counter shows error E2?
- Ttanner74Jul 28, 2025
If your MUNBYN Banknote Counter frequently displays error E2, adjust the screw counter-clockwise to decrease the feeding gap.
What to do if my MUNBYN Banknote Counter shows error E2?
If your MUNBYN Banknote Counter frequently displays error E2, adjust the screw counter-clockwise to decrease the feeding gap.
How to fix E1 error on MUNBYN Banknote Counter?
If your MUNBYN Banknote Counter displays error E1, remove the banknote and clean the UV sensor.
General| Brand | MUNBYN |
|---|---|
| Model | IMC08 |
| Category | Banknote Counter |
| Language | English |
Essential safety guidelines to follow during the installation process.
Instructions for correctly connecting the power supply to the machine.
Detailed explanations of how to use each function key on the control panel.
Steps for powering on the machine and its initial self-check process.
How to select the currency for counting, including AUTO and MULT modes.
Using the AUTO mode for counting and identifying banknotes.
How to use the MULT mode for counting mixed currencies.
How to switch between different counting modes like MDC, CNT, SDC, SDCV.
Details on using the MDC mode for counting mixed denominations.
Explanation of the SDC mode for counting single denominations.
Adjusting the sensitivity levels for counterfeit detection.
Access and navigate through various service functions like sensor readings and calibration.
Step-by-step instructions for updating the IMC08 machine software using a USB drive.
