MUNBYN IMC08 - Count Only Mode (CNT); Single Denomination Counting by Version (SDCV)

Page17of33
IMC08 Banknote Counter & Sorter User Manual
Version 1.03
Figure 5-13 SDC Mode
5.4.3. CNT Mode
As shown in the following figure, the IMC08 is in CNT mode. This mode does not limit the currency, and
only counts the number of banknotes. It only works with the double note detection function and no other
counterfeit detection function. In this mode, the IMC08 has 4 counting speed (800/1000/1200/1500 pcs/min)
options.
Figure 5-14 CNT Mode
Note: While in the CNT mode, there is only a double note detection function but no any counterfeit detection
functions.
5.4.4. SDCV Mode
As shown below, the IMC08 is in SDCV mode. This mode allows the user to count and sort notes by one
version which is automatically determined by the first note scanned in a stack. This can be useful to be sure
that there are not notes of other versions in a large strap of one version. The first banknote in the hopper
determines the counting and sorting version. Any time a note passes through the IMC08 and does not
conform to the version determined by the first note, the machine will reject this note into the reject pocket.
The total amount and number of banknotes will be displayed on the screen. In this mode, the IMC08 has 2
counting speed (800/1000/min) options.