How to Disassemble How to Assemble
10
ATTACHING THE TRAY
STORING THE TRAY
FOLDING THE LEGS
Align the grooves on the underside of the
tray with the sides of the seat. Then push the
release levers on the underside of the tray
and slide inward until tray locks into place.
NOTE: There are two tray positions. Pull the
release levers to slide the tray to its desired
position.
Hang the tray against the rear legs by using
the hooks on the back of the seat brackets.
TO FOLD: Press the release buttons on the
side brackets at the same time, then push
the front legs toward the rear legs.
TO UNFOLD: Press the release buttons
and pull the front legs forward. Make sure
the legs lock into position before seating
your child.
Hook
To Next Page
Loading...
