Munchkin Float - How to Assemble; Attaching Legs to Leg Bridges; Installing Seat

How to Assemble
8
ATTACHING LEGS TO LEG BRIDGES
INSTALLING SEAT
1. Place a leg bridge on the oor and
ensure bottom of leg bridge is at
on the ground, then insert the front
(shorter) legs into the sockets. Side
with arrow pointing down goes into
the bridge sockets.
3. Insert front legs (A, B) and back legs
(C, D) to matching left and right
seat bracket sockets. Make sure the
bridge is at against the oor when
assembling the seat bracket.
If the seat bracket is folded, press
the button on the side to open until
you hear the click sound.
TIP: Seat brackets with the hooks
attach to the back legs.
2. Insert the back legs into the sockets
of the other leg bridge. Again, make
sure the side with arrow pointing
down goes into the bridge sockets.
TIP: Step on the bridges to keep the
legs upright during assembly.
B
B
D
C
A
A
Hook
D
B
C
A
Front
Front
Front
Back