Need help?Do you have a question about the Munters ML180 and is the answer not in the manual?
General| Model | ML180 |
|---|---|
| Dehumidification Capacity | 180 liters/day |
| Airflow | 1600 m³/h |
| Weight | 170 kg |
| Operating Temperature Range | 5°C to 35°C |
| Power Supply | 50Hz |
| Voltage | 230V |
Explains the purpose and scope of the user manual.
Details prohibited uses and installations for the dehumidifier.
Provides general safety guidelines and warnings.
Guidance on handling and moving the dehumidifier during transport.
Steps for checking the delivered unit for completeness and damage.
Essential safety precautions during the installation process.
Specifies suitable locations and environmental conditions for installation.
Details requirements for the unit's base and mounting.
Explains how to change the orientation of air duct connections.
Provides guidelines for connecting air ducts to the unit.
Specific precautions for models with LI desiccant rotors.
Details regarding the safe connection of electrical power.
Information on connecting and using an external humidity sensor.
Information on gas reactivation for specific ML1100 models.
Configuration steps required before initial operation.
Crucial checks to perform before powering on the unit.
Procedure for verifying and setting airflows for optimal performance.
Overview of the operator panel and mode selection.
Instructions for emergency shutdown and normal stopping.
Detailed explanation of the operator panel indicators and controls.
Specifics of the RH98 operator panel interface and functions.
Instructions for operating the dehumidifier in different modes.
Safety precautions related to service and maintenance activities.
General advice on maintaining the dehumidifier for optimal performance.
Details the different service plans available from Munters.
Step-by-step guide for replacing the unit's filters.
Introduction to troubleshooting procedures and corrective actions.
Safety warnings for personnel performing fault tracing.
A list of common symptoms, causes, and corrective actions for faults.
Provides unit dimensions and required clearance for installation and service.
Graphs showing dehumidification capacity based on temperature and humidity.
Detailed technical specifications and performance data of the unit.
Information on sound pressure and sound power levels.
Information on optional configurations and components for ML series dehumidifiers.
Describes the function of the running time meter.
Explains the optional rotor stop alarm system.
Details the optional blocked filter alarm feature.
Information on optional external filter boxes.
Overview of RH98 and VariDry humidity control systems.
To Next Page
