Need help?Do you have a question about the Munters MLT1400 and is the answer not in the manual?
General| Brand | Munters |
|---|---|
| Model | MLT1400 |
| Category | Dehumidifier |
| Language | English |
Manual's purpose, installation, and usage information.
Specifies non-intended applications and installation locations.
General safety measures and responsibilities during operation.
Explains identification plates and labels on the unit.
Describes how the unit is controlled and monitored via the operator panel.
Explains how faults are indicated on the operator panel and other systems.
Overview of ML series desiccant dehumidifiers and their construction.
Explains the internal airflow and dehumidification process.
Identifies and lists the main components of the dehumidifier with a diagram.
Guidelines for safe transportation and handling of the unit.
Procedures for checking the delivered unit for completeness and damage.
Instructions for storing the dehumidifier prior to installation.
Safety warnings and precautions related to unit installation.
Guidelines for selecting an appropriate installation site for optimal performance.
Requirements for the unit's foundation and installation on a level surface.
General recommendations for connecting process and reactivation air ducts.
Safety warnings and general requirements for electrical connections.
Information on connecting and positioning an external humidity sensor for automatic control.
Overview of standard functions requiring initial setup before operation.
How a single-stage humidity sensor controls the unit's operation.
How a two-stage humidity sensor controls the reactivation heater.
Essential checks to perform before initial start-up of the dehumidifier.
Procedures for checking and adjusting dry air and reactivation airflows for optimal performance.
How to stop the unit normally and in emergency situations.
Describes the main power switch and the operator panel with its indicators.
Details the RH98 operator panel display and functions.
Step-by-step guide for operating the unit in manual mode.
Instructions for operating the unit in automatic mode with a humidity sensor.
Safety warnings for performing service and maintenance tasks.
Importance of regular service and maintenance for optimal performance.
Description of available service packages from commissioning to extended component replacement.
Details maintenance tasks based on operating hours or calendar time.
Step-by-step guide for replacing the unit's filters.
Purpose of the chapter to guide fault identification and correction.
Safety warnings for personnel performing fault tracing and repairs.
Lists common symptoms, possible causes, and corrective actions for unit faults.
Provides physical dimensions and required service space for unit installation.
Charts showing dehumidification capacity based on process air temperature and humidity.
Detailed technical specifications for process air, reactivation heater, and miscellaneous data.
Sound pressure and power levels for the ML420 model in different duct configurations.
Sound data for the ML1100 model, covering sound pressure and power levels.
Explanation of the blocked filter alarm system and its indicators.
Information on external filter boxes available for the units.
Overview of RH98 and VariDry humidity control systems.
How to set and adjust parameters for humidity control and alarms.
Explains process alarms, messages, and how to acknowledge them.
To Next Page
