Need help?Do you have a question about the Munters ML420 and is the answer not in the manual?
General| Model | ML420 |
|---|---|
| Airflow | 300 m³/h |
| Frequency | 50/60 Hz |
| Power Consumption | 7.8 kW |
| Voltage | 220-240V |
Details the designated purpose of the dehumidifier and prohibited uses.
Specifies uses and environments that are not intended for the dehumidifier.
Provides general safety guidelines and warnings for operation.
Details how faults are indicated on the operator panel.
Specifies suitable locations and environmental conditions for installation.
General recommendations for connecting air ducts to the unit.
Essential settings and configurations required before initial operation.
A checklist of essential checks before the first start-up.
Procedures for verifying and setting airflows for optimal performance.
Describes the main operator panel and its indicators.
How to operate the dehumidifier in manual mode.
Operation with a connected humidity sensor.
Operation with factory-installed RH98 or VariDry systems.
Recommended intervals and tasks for routine maintenance.
Safety precautions to be observed during fault diagnosis.
A list of common symptoms, causes, and corrective actions for faults.
Detailed technical specifications including airflow, power, and electrical data.
How to set parameters for humidity control systems.
To Next Page
