Need help?Do you have a question about the Munters ML1350 and is the answer not in the manual?
General| Model | ML1350 |
|---|---|
| Airflow | 1350 m³/h |
| Refrigerant | R407C |
| Power Supply | 400V/3ph/50Hz |
| Operating Temperature | -20 to +40°C |
Specifies the designated purpose of the dehumidifier and outlines incorrect usage scenarios.
Details the terms, limitations, and conditions applicable to the dehumidifier's warranty.
Highlights potential hazards and safety precautions indicated by hazard symbols.
Confirms compliance with essential safety requirements of relevant EU directives.
States copyright protection and restrictions on manual reproduction or transmission.
Provides an overview of the manual's content and purpose for safe and efficient dehumidifier use.
Defines prohibited applications and installation locations for the dehumidifier.
Emphasizes user responsibility for safety during operation and general precautions.
Explains how the dehumidifier is controlled and monitored via the operator panel.
Describes how faults are displayed on the operator panel and humidity control system.
Introduces the ML series desiccant dehumidifiers and their construction.
Explains the internal airflow and desiccant rotor process for dehumidification.
Provides guidelines for safe handling and movement of the dehumidifier during transport.
Outlines the procedure for checking the delivered unit for completeness and damage.
Gives instructions for storing the dehumidifier prior to installation to prevent damage.
Details critical safety warnings and precautions for the installation process.
Specifies environmental and space requirements for optimal dehumidifier installation.
Provides guidelines for connecting ducts in accordance with ISO 13351 standards.
Details standard functions requiring initial setup and connection to external equipment.
Explains operation with a single-stage sensor and its connection requirements.
Describes control with a two-stage sensor and its impact on reactivation heater stages.
Lists faults indicated by the PCB display for process air, fans, motor, and filters.
Overview of the operator panel, mode selector switch, and LED indicators.
Instructions for emergency shutdown using the main power switch.
Recommends following pre-start checks and airflow adjustments before initial operation.
Step-by-step guide for operating the dehumidifier in manual mode.
Procedure for operating the unit in automatic mode with a connected humidity sensor.
Instructions for automatic operation using factory-installed RH98 or VariDry systems.
Mandatory safety precautions for personnel performing maintenance and repairs.
Emphasizes the importance of regular service for optimal reliability and efficiency.
Details four standard service options available for commissioning and maintenance.
Introduces the chapter on identifying and correcting common faults.
Reinforces safety warnings for qualified personnel performing troubleshooting.
Provides detailed dimensions and required service space for unit installation.
Illustrates approximate dehumidification capacity based on process air temperature and humidity.
Presents sound pressure and power levels for the ML420 model at different frequencies.
Provides sound data for the ML690 model across various frequency ranges.
Details sound pressure and power levels for the MLT800 model.
Contains sound data for the ML1100 model at specified frequency bands.
Presents sound level information for the ML1350 model.
Lists sound pressure and power levels for the MLT1400 model.
Information on optional products and configurations that can be fitted to ML series dehumidifiers.
Describes the function of the running time meter for tracking unit operation hours.
Explains the rotor stop alarm feature and its automatic shutdown mechanism.
Details the blocked filter alarm system using a differential pressure switch.
Information on optional external filter boxes and their pressure drop characteristics.
Overview of RH98 and VariDry humidity control systems for regulating reactivation heater power.
Describes the humidity transmitter sensor, its types, and signal transmission.
Explains the function of the control unit in receiving signals and controlling the dehumidifier.
To Next Page
