Need help?Do you have a question about the Munters MX2 30 and is the answer not in the manual?
General| Airflow | 450 m³/h |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Supply | 1 phase |
| Operating Temperature Range | -20°C to +40°C |
Details the intended application and approved uses of the dehumidifier.
Outlines the terms, conditions, and procedures for warranty claims and service.
Provides crucial safety information, hazard symbols, and warnings for safe operation.
States compliance with relevant EU directives and ISO certifications.
Information regarding manual copyright and contact for comments.
Overview of Munters dehumidifiers and contact information for inquiries.
Explains the manual's purpose and storage recommendations for safe operation.
Highlights general safety measures, hazards, and responsibilities during operation.
Details safety labels attached to the unit and their meanings.
Describes how the dehumidifier is controlled and monitored via the control panel (HMI).
Specifies environmental and harmonic emission limitations for unit placement and operation.
Explains how faults are indicated by the control panel's red light and display.
Emphasizes the importance of steam quality for steam heater performance and longevity.
Details the information found on the unit's identification plate.
Explains the purpose of built-in pressure test points for installation and inspection.
Describes the dehumidifier's design, casing, and manufacturing standards.
Explains how the desiccant rotor works to dehumidify air, including airflow paths.
Illustrates and lists the main components of the MX2 30 model.
Illustrates and lists the main components of the MX2 35-95 models.
Information on optional functions and components available for MX2 dehumidifiers.
Details the insulated inlet for pre-cooled process air to prevent condensation.
Describes fixed and variable speed control options for the process fan.
Explains the bypass damper system for managing airflow exceeding rotor capacity.
Describes energy-saving solutions that recycle heat from the rotor.
Explains the LDP function for achieving extra low dewpoints.
Provides crucial safety warnings for installation, handling, and electrical work.
Details safe procedures and equipment for moving the dehumidifier unit.
Guides on checking the delivery for completeness, damage, and reporting issues.
Lists the steam-related components included with the dehumidifier delivery.
Provides instructions for proper storage of the dehumidifier before installation.
Specifies essential site conditions and clearances needed for optimal performance and maintenance.
Details the requirements and dimensions for installing the dehumidifier's foundation.
Explains the two principles of steam regulation for dehumidification capacity.
Provides essential recommendations for installing the steam supply system components.
Lists the steps for performing pre-start checks and initial unit verification.
Offers general guidance on installing process and reactivation air ductwork.
Details design considerations for outdoor air inlet ducting to prevent contamination.
Provides guidance on wet air outlet duct material, insulation, and drainage.
Specifies dimensions for reactivation and process air inlets for various MX2 models.
Provides dimensions for dry air outlet and process air inlet connections.
Specifies dimensions for process air outlet duct connections for various MX2 models.
Provides dimensions for reactivation air outlet duct connections for various MX2 models.
Details the electrical system requirements and connection of the mains power supply.
Describes the optional humidity transmitters and their installation and placement.
Provides instructions for commissioning and initial start-up of the dehumidifier.
Lists all essential checks to be performed before initial unit start-up.
Guides on adjusting process and reactivation airflows for optimal performance.
Explains the importance of airflow adjustment and recommended methods.
Details procedures for setting airflows for fixed and variable speed fan controls.
Provides the formula for calculating differential pressure for fan speed adjustment.
Describes the functions of the control panel and its indicators.
Explains the operating modes (AUTO, MAN) and remote start/stop functions.
Outlines the procedure for quickly stopping the unit in normal and emergency situations.
Details the initial start-up procedures for Manual (MAN) and Automatic (AUTO) modes.
Step-by-step guide for starting the unit in manual operating mode.
Procedure for starting the unit in automatic mode with humidity control.
Crucial safety warnings for personnel performing service and maintenance.
Highlights the importance of regular servicing for efficiency and longevity.
Outlines the different service packages available for unit commissioning and maintenance.
Information on obtaining an extended warranty through a service contract.
Explains the meaning of the yellow service indicator lamp and its associated alarms.
Details the service tasks and intervals based on operating hours and calendar time.
Details service tasks and intervals for higher operating hours.
Provides periodic maintenance tasks for the steam reactivation heater.
Step-by-step guide for safely replacing the process and reactivation air filters.
Safety warnings for personnel performing fault tracing and repairs.
A guide to identifying and rectifying common dehumidifier faults and symptoms.
A guide to identifying and rectifying common faults specific to the steam heater unit.
Graphical representation of dehumidification capacity based on air temperature and humidity.
Presents sound pressure and power levels for various duct connection setups.
Provides noise data for different ductwork configurations and frequencies.
Illustrates the unit dimensions and provides a table with detailed measurements.
Shows dimensions for units configured without a process fan.
Illustrates the required service space around the unit for maintenance access.
Presents comprehensive technical specifications, including airflow, power, and current ratings.
Provides guidelines for safe and compliant disposal of the unit.
Lists contact information for Munters offices worldwide.
To Next Page
