Need help?Do you have a question about the Munters ComDry and is the answer not in the manual?
General| Type | Desiccant dehumidifier |
|---|---|
| Dehumidification Capacity | Varies by model |
| Airflow | Varies by model |
| Power Supply | Varies by model |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Application | Industrial and commercial use |
Critical safety warnings and precautions for operating the dehumidifier, including water immersion and electrical shock risks.
Overview of the ComDry dehumidifier's control system, humidity control, and process fan modes.
Details the layout and functions of the ComDry control panel, including menu indicators and button functions.
Guides through the process of booting the control system and starting the dehumidifier unit.
Instructions for safely stopping the dehumidifier and performing a quick stop in emergencies.
Explains how the dehumidifier behaves and restarts after a power interruption.
Instructions on how to navigate through the various menus and options on the control panel.
Details the different access levels available for system settings.
Steps to unlock and access the control system settings, including PIN-code protection.
Procedure for modifying system settings, including confirmation and read-only parameter information.
Step-by-step guide on how to reset an active alarm on the dehumidifier.
Instructions on how to reset various counters, requiring one-star access.
Procedure to restore the dehumidifier to its original factory default settings.
Information on setting service intervals and managing service alarms, including checking parameters.
Details on humidity control types, internal/external sensor readings, set values, and hysteresis.
Explanation of run time registration, including resettable trip meter and non-resettable total run time.
Information on the resettable kWh counter and real-time monitoring of power, current, and voltage.
Details on various temperature measurements within the dehumidifier, including process, reactivation, and wet air temperatures.
Covers process fan modes, humidity control units, and display information settings.
Explains how operation faults are indicated via alarms, including source of alarm and status.
Provides tables for minimum, maximum, and default values for humidity, service time, and functions.
To Next Page
