Munters ComDry - Resetting Counters; Restoring Default Settings

ComDryControlSystem
1.13Resetthecounters
Toresetcountersyoumusthave“one-star”access,see1.10,Accessthecontrolsystem.
Followthesestepstoresetthecounters:
Step
Action
Result/Illustration
1
Navigatetothecounteryouwanttoreset.Seesection
1.8,Navigatethemenus.
2
Press
Thedisplaychangesto
[RstNO]and[NO]isashing.
3
Toggle[NO]to[YES]bypressingeither
or.
NOTE!If
[ RstNO ] / [ RstYES ] isleftwithoutactionfor30
seconds,thedisplayautomaticallychangesbacktothestored
countervalue.
4
Conrmtheresettingwith
.
Thecounterisreset.
NOTE!PressingENTERwhenthedisplayshows [ RstNO ] willreturnthestoredcountervalueinthedisplay
again.
1.14Restorethedefaultsettings
Torestorethefactorydefaultsettingsyoumusthave“one-star”access,see1.10,Accessthecontrolsystem.
Followthesestepstorestoreallthedefaultfactorysettings:
Step
Action
Result/Illustration
1
GototheFunctionsmenuandnavigatetoDefault.
2
Press
Thedisplaychangesto[RstNO]and
[NO]isashing.
3
Toggle[NO]to[YES]bypressing
either
or
4
Conrmbypressing
.
Allvaluesrevertstofactorysettings.
8OperationMEN-CDCS-A1808