To Next Page
J
Justin KeyAug 30, 2025
What to do if Muratec Fax Machine doesn't scan document?
- Aamy41Aug 30, 2025
If the document is not scanned on your Muratec Fax Machine because it is too thick, too thin, or too small, use the original glass to send the fax.
What to do if Muratec Fax Machine doesn't scan document?
If the document is not scanned on your Muratec Fax Machine because it is too thick, too thin, or too small, use the original glass to send the fax.
How to fix document scanned at an angle on Muratec Fax Machine?
If the document is scanned at an angle on your Muratec Fax Machine, slide the document guides to fit the width of the document.
Why is the received fax blank on my Muratec Fax Machine?
If the received fax is blank on your Muratec Fax Machine, check that the machine can make clean copies. If it can, have the caller send the fax again. Also, the caller may have loaded the pages backward, so contact the caller.
Why Muratec Fax Machine print processing finished, but transmission does not start?
If print processing on the computer finished, but transmission does not start on your Muratec Fax Machine, you can try the following: * Check the specified printer name. * Make sure that the cable is correctly connected. * Check the control panel of this machine. * From the control panel of this machine, check the Job screen for the processing order for the job. * Enter the correct account name and password. * Enter the correct user name and password. * Check whether a test page can be sent. * Contact your administrator. * Contact your administrator.
What to do if Muratec Fax Machine sends blank faxes?
If the fax received by the recipient is blank when using your Muratec Fax Machine, ensure the document is loaded facing up when using the ADF.
What to do if the memory is full on Muratec Fax Machine?
If the memory is full on your Muratec Fax Machine, send the scanned document pages if you are sending a fax. Otherwise, send the fax manually. If you are receiving a fax, print the received documents saved in the memory.
How to fix blurry faxes from Muratec Fax Machine?
If the fax received from your Muratec Fax Machine is blurry, try the following: * Make sure the document is positioned correctly. * Clean the original glass. * Adjust the density if the text is too faint. * Check the telephone line and try sending the fax again. * Make a copy to check that this machine is operating correctly, and then, if the copy was printed correctly, have the recipient check the condition of their fax machine.
Why is reception not possible on my Muratec Fax Machine?
If reception is not possible on your Muratec Fax Machine, consider the following: * Ensure the machine is set to automatic reception, or perform the manual reception operation. * If memory is full, load paper if it is empty, and then print the faxes stored in memory. * Check the telephone line connection and connect if disconnected. * If the issue persists, make a copy to check that this machine is operating correctly, and then, if the copy was printed correctly, have the recipient check the condition of their fax machine. * If [Closed Network RX Password] - [Enable] is set to [Yes], faxes can only be received from specific senders. For details, contact the administrator.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Speed (Black) | 35 ppm |
| Print Speed (Color) | 35 ppm |
| Max Print Resolution | 1200 x 1200 dpi |
| Scan Type | Flatbed, ADF |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed (Black) | 35 cpm |
| Copy Speed (Color) | 35 cpm |
| Fax Modem Speed | 33.6 Kbps |
| Monthly Duty Cycle | 120, 000 pages |
| Paper Capacity (Standard) | 500 sheets |
| Display | 7-inch color touch panel |
| Copy Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 3 seconds per page |
| Supported Operating Systems | Windows, Mac OS |
| Connectivity | Ethernet, USB 2.0 |
| Interface | USB, Ethernet |
