00-02-0605 - 13 - Rev 09-10-08
1-Up Display Settings
1. Touch Menu and use the Arrow Keys to highlight
SETUP 1-UP DISPLAY, then press Enter.
2. To select USE DEFAULTS, highlight the option and
press Enter. A message indicating “RESTORED TO
DEFAULTS” is displayed.
3. To select CUSTOM SETUP, highlight the option and
press Enter. A list of engine parameters is displayed.
4. To select a parameter, use the Arrow Keys to scroll
and highlight the parameter, then touch Enter.
Selected parameters are indicated by a # symbol to the
right of it and represent the order in which the
parameter will be displayed.
5. To deselect a selected parameter and remove it from
the list of displayed parameters, highlight the parameter
and touch Enter.
To Next Page
Loading...
