00-02-0605 - 26 - Rev 09-10-08
Selecting Engine ECU
1. From the UTILITIES menu, choose SELECT ENGINE
ECU.
2. The message “LISTEN TO ECU: ALL” is displayed as
the default setting, and indicates the PV101 is listening
to all devices on the network.
3. To change the setting to a specific address, press the
Arrow Keys to scroll through the numbers (0-253).
4. Once the target address is displayed, press Enter.
5. A confirmation screen displays. Selecting “NO” (shown
above Menu key) returns to the SELECT ENGINE ECU
screen. Selecting “YES” (shown above Enter key)
stores the selected address and returns to the
UTILITIES menu.
To Next Page
Loading...
