00-02-0605 - 24 - Rev 09-10-08
being used. Most engine ECU’s use Version 4,
therefore in most cases adjustment of this menu option
will not be required.
Upon receiving an unrecognizable fault, change to a
different J1939 Version. If the fault SPN does not
change when the version is changed, the ECU
generating the fault is using Fault Conversion method 4.
If the SPN number does change but is still
unrecognizable, try changing to another J1939 Version
not yet used and continue to check the SPN number.
6. ANALOG INPUT – provides two setting options:
• BACKLIGHT DIMMER, the default setting, will
accept an optional backlighting dimmer.
• FUEL LEVEL accepts an optional Murphy fuel
sender (model ES2F recommended) for fuel level
information.
7. SELECT ENGINE ECU – listens to all ECUs or scrolls
to a specific engine ECU.
To Next Page
Loading...
