Murphy VS2 User Manual

VS-7037N page 8 of 8
SERVICE PARTS
PART NO. DESCRIPTION
VS2
20000030 Movement assembly
20000031 Glass and gasket assembly
20000032 Reset push button assembly
VS2C
20000030 Movement assembly
20000031 Glass and gasket assembly
20000032 Reset push button assembly
20050021 Mounting clamp
20000185 VS2C 5-clamp hardware package assembly.
20050465 2-Conductor electrical cable, 45 feet (13.7 meters)
VS2EX
20010091 Movement assembly
20050087 Cover
00000309 Cover gasket
20010090 Snap-switch and insulator kit (1 switch per kit)
prior to September 1, 1995.*
20000288 Snap-switch and insulator kit (1 switch per kit) for models
manufactured on September 1, 1995 or later.*
20000289 C-clamp conversion mounting kit
VS2EXR
20000262 Movement assembly
20050087 Cover
00000309 Cover gasket
20010090 Snap-switch and insulator kit (1 switch per kit)
prior to September 1, 1995.*
20000288 Snap-switch and insulator kit (1 switch per kit) for models
manufactured on September 1, 1995 or later.*
20000049 Reset solenoid assembly (115 VAC)
20000234 Reset solenoid assembly (24 VDC)
20000289 C-clamp conversion mounting kit
PART NO. DESCRIPTION
VS2EXRB
20010090 Snap-switch and insulator kit (1 switch per kit)
prior to September 1, 1995.*
20000288 Snap-switch and insulator kit (1 switch per kit) for models
manufactured on September 1, 1995 or later.*
20000057 Inside snap-switch and insulator kit (1 switch per kit) for
model VS2EXRB-D prior to September 1, 1995.*
20000058 Outside snap-switch and insulator kit (1 switch per kit) for
model VS2EXRB-D prior to September 1, 1995.*
20000287 Outside snap-switch and insulator kit (1 switch per kit) for model
VS2EXRB-D manufactured on September 1, 1995 or later.*
20000290 Inside snap-switch and insulator kit (1 switch per kit) for model
VS2EXRB-D manufactured on September 1, 1995 or later.*
20050077 Adjustment shaft
20000262 Movement assembly
20000049 Reset solenoid assembly (115 VAC)
20000234 Reset solenoid assembly (24 VDC)
VS94 Series
25050506 Dust boot
00000232 Conduit fitting
20010090 Snap-switch and insulator kit (1 switch per assembly)
prior to September 1, 1995.**
20000288 Snap-switch and insulator kit (1 switch per assembly)
for models manufactured on September 1, 1995 or later.***
* If no date code is found, refer to the old switch. Models with date 0895 and before use old switch.
Dated 0995 after, use straight snap-switch arm, no rollers.
** Models dated Q1 thru Q8 (formed snap-switch arm and rollers).
***Models date coded Q9 thru Q12 and R1 thru R12 (straight snap-switch arm, no rollers).
CONTROL SYSTEMS & SERVICES DIVISION
P.O. Box 1819; Rosenberg, Texas 77471; USA
+1 281 633 4500 fax +1 281 633 4588
e-mail sales@fwmurphy.com
INDUSTRIAL PANEL DIVISION
P.O. Box 470248
Tulsa, Oklahoma 74147 USA
+1 918 317 4100 fax +1 918 317 4266
e-mail sales@fwmurphy.com
FRANK W. MURPHY, LTD.
Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
+44 1722 410055 fax +44 1722 410088
e-mail sales@fwmurphy.co.uk
www.fwmurphy.co.uk
MURPHY DE MEXICO, S.A. DE C.V.
Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
+52 444 8206264 fax +52 444 8206336
Villahermosa Office +52 993 3162117
e-mail ventas@murphymex.com.mx
www.murphymex.com.mx
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
FW Murphy
P.O. Box 470248
Tulsa, Oklahoma 74147 USA
+1 918 317 4100 fax +1 918 317 4266
e-mail sales@fwmurphy.com
www.fwmurphy.com
Printed in U.S.A. 078792

Murphy VS2 Specifications

General

Brand	Murphy
Model	VS2
Category	Switch
Language	English