Musical Fidelity M5si User Manual (English)

To Next Page

Instructions for use

Thank you for purchasing the Musical Fidelity M5si integrated amplifier.

The M5si uses our tried and tested ultra low distortion power amplifier circuitry, which has enough current

reserve to drive even the most demanding speakers with ease. A very low noise and distortion, high-quality

preamplifier completes the integrated amplifier giving a perfect sound from a compact looking full size unit.

The M5si features a low noise phono stage to allow direct connection of a turntable for vinyl listening.

An asynchronous USB input has also been included which will connect to computer based home audio and

allow full quality playback of digital media, up to and including 24 bits, 96kHz sampling rate.

The M5si will aesthetically match with any future M5s as well as current M3s and M6s series products. Such

combinations will yield one of the best high-fidelity systems available at any price.

Used properly and carefully, it should give many years of outstanding musical reproduction.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they

may harm the surface finish.

If there are any questions about the audio system, please consult the dealer who is there to help and advise.

Need help?

Do you have a question about the Musical Fidelity M5si and is the answer not in the manual?

Musical Fidelity M5si Specifications

General

Power Output	150 Watts per channel into 8 Ohms
Frequency Response	+0, –0.1dB, 10Hz to 20 kHz
Signal-to-Noise Ratio	>100dB
Input Impedance	40k Ohms
Total Harmonic Distortion	<0.01%
Dimensions	440 x 100 x 400 mm (W x H x D)
Inputs	4 x Line Level RCA, 1 x USB
USB Input	USB type “B” connector, Streamed up to 24-bit/96kHz