Musical Fidelity MX-VYNL User Manual

MX-VYNL Fully balanced phono stage
The ultimate in analogue listening.
The MX-VYNL is a very high performance, fully balanced, highly accurate phono MM/MC cartridge
amplifier in a beautifully designed and executed casework.
The unit features two completely separate, independently selectable cartridge inputs, balanced as well as
single ended. This allows choice between two different turntables if required.
Selectable gain is provided to allow for different cartridge sensitivities and to suit any equipment.
Cartridge type and loading is selected by front selector wheel for optimum cartridge performance.

Musical Fidelity MX-VYNL Specifications

General

Type	Phono Preamplifier
Input Impedance (MM)	47 kΩ
Input Capacitance (MM)	100 pF
Input Capacitance (MC)	100 pF
Gain (MM)	40 dB
Gain (MC)	60 dB
Input Sensitivity (MM)	5 mV
Input Sensitivity (MC)	0.5 mV
RIAA Accuracy	±0.2dB
Frequency Response	20 Hz - 20 kHz
Power Supply	External

Summary

Safety Instructions

Important Safety Notices

General safety precautions for handling and operating the device, including voltage checks and avoiding liquids.

Device Overview

Front Panel Layout

Description of the front panel controls, indicators, and the cartridge/loading selector.

Rear Panel Connections

Details of the rear panel input and output connectors, including balanced and RCA types.

XLR Socket Pinouts

Wiring configuration for XLR balanced input and output sockets, specifying pin functions.

Connections and Setup

Audio Inputs and Outputs

Connecting audio outputs, phono inputs, and handling signal types to avoid distortion.

Turntable and Power Connection

Steps for connecting the turntable and mains power supply before operation.

Grounding Post Usage

Guidance on using the grounding post to reduce potential hum issues.

Front Panel Controls

Power and Standby

Instructions for powering the unit on and off from standby mode using the toggle switch.

Cartridge Loading Selection

How to select cartridge type and impedance loading using the front selector wheel.

EQ and Gain Adjustments

Explanation of EQ settings for low-frequency roll-off and gain adjustments for sensitivity.

Warranty Information

Details on product warranty, limitations, and manufacturer responsibility for modifications.

Technical Specifications

Product Disposal