Musical Fidelity M6I User Manual

Instructions for use
Thank you for purchasing the Musical Fidelity M6i dual mono Integrated amplifier.
The M6i is designed to be partnered with present and future M6 series products. This combination yields one of
the best high-fidelity systems available at any price.
Used properly and carefully, it should give many years of outstanding musical reproduction.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may
harm the surface finish.
If there are any questions about the audio system, please consult the dealer who is there to help and advise.

Musical Fidelity M6I Specifications

General

Total Harmonic Distortion	<0.01% (20Hz - 20kHz)
Weight	16.6 kg
Signal-to-Noise Ratio	>100dB (A-weighted)
Inputs	1 x XLR
Outputs	1 x Line Level RCA
Dimensions	440 x 400mm (W x D)
Input Sensitivity	300mV
Input Impedance	47k Ohms

Summary

Instructions for use

Safety Information

U.K. Mains Plug and Earthing

Details on the UK 13 amp plug, fuse holder, and earthing instructions for safe operation.

Product Modifications Warning

Warning against unauthorized modifications that could void the user's authority to operate the equipment.

General Advice

Installation and Placement Precautions

General advice on unit placement, avoiding liquids, heat, and unauthorized access.

Cleaning and Lightning Protection

Guidance on cleaning the unit and protecting the system during electrical storms.

Item Disposal Information

Environmental Disposal Guidelines

Information on not disposing of the product as household waste and proper recycling methods.

Installation

Introduction and Unit Features

Congratulates on purchase, details unit features, design, and performance.

Cleaning and Placement Advice

Instructions for cleaning the unit and positioning it for ventilation and humidity protection.

Connecting Power and Audio

Details on connecting the IEC mains cable, RCA inputs, XLR inputs, and speaker outputs.

Facilities & Connections

Front Panel Overview

Identifies front panel controls, buttons, and the IR receiver lens.

Rear Panel Connectivity

Details rear panel connectors including speaker outputs, inputs, and IEC mains input.

Remote Control Handset

Remote Operation and Batteries

Explains remote aiming, battery type, replacement, and disposal.

Remote Control Button Functions

Details functions of CD, Amplifier, and CD player sections on the remote.

Operation

Starting and Volume Control

Steps for powering on the unit and adjusting listening volume levels.

Mute Function and Input Selection

How to mute/unmute speakers and select different audio inputs.

AUX/HT Input Modes

Explains AUX and HT modes for the AUX/HT input, including safety warnings.

TAPE Input and Monitoring

How to select the TAPE input and monitor recordings via the TAPE OUT.

TAPE MONITOR Functionality

Using the TAPE MONITOR button for recording and playback monitoring.

USB Input Setup and Operation

Explains USB input LED, connection, and computer setup for PC and Mac.

PC and Mac USB Configuration

Steps to check device recognition and audio settings on PC and Mac for USB audio.

Problems?

Troubleshooting Power and Sound

Steps for resolving no power, no sound, and sound cut issues.

Resolving Sound Quality and Hum

Solutions for imprecise sound, bass/image issues, and hum problems.

USB Input and Dropouts Troubleshooting

Steps for no audio output, USB detection issues, and sound dropouts.

Remote Control Troubleshooting

Steps to resolve issues with the remote control not working or having reduced range.

Specifications

Output and Input Specifications

Details on power, voltage, current, THD+N, S/N ratio, and impedance.

Connection Types and Power

Information on connector types, mains voltages, consumption, and weight.

Physical Dimensions and Accessories

Specifies physical dimensions and lists standard included accessories.

Manual History

Release and Revision Log

Records of manual revisions, dates, and the specific changes made in each issue.