Musical Fidelity M6si User Manual (English)

To Next Page

Instructions for use

Thank you for purchasing the Musical Fidelity M6si integrated amplifier.

The M6si uses our tried and tested ultra low distortion power amplifier circuitry, which has enough current

reserve to drive even the most demanding speakers with ease. A very low noise and distortion, high-quality

preamplifier completes the integrated amplifier giving a perfect sound from a compact looking full size unit.

The M6si now features two new inputs for further versatility.

A low noise phono stage has been added to allow direct connection of a turntable for vinyl listening.

An asynchronous USB input has also been included which will connect to computer based home audio and

allow full quality playback of digital media, up to and including 24 bits, 96kHz sampling rate.

The M6si will aesthetically match with present and future M6/s series products. Such a combination will yield

one of the best high-fidelity systems available at any price.

Used properly and carefully, it should give many years of outstanding musical reproduction.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they

may harm the surface finish.

If there are any questions about the audio system, please consult the dealer who is there to help and advise.

Need help?

Do you have a question about the Musical Fidelity M6si and is the answer not in the manual?

Musical Fidelity M6si Specifications

General

Frequency Response	+0, –0.1dB, 10Hz to 20kHz
Total Harmonic Distortion	<0.007% typical, 20Hz to 20kHz
Dimensions	440 mm wide, 100 mm high including feet, 400 mm deep (from front to back including speaker terminals)
USB Input	Asynchronous 24-bit 96kHz
Input Impedance	40 k Ohms (Line), 47 k Ohms (MM Phono)
Power Output	220 Watts per channel into 8 Ohms
Inputs	4 x Line Level RCA, 1 x USB type “B” connector