Need help?Do you have a question about the Mustek POWERMUST 636 and is the answer not in the manual?
Details risks of electric shock, live parts, fuse replacement, leakage current, and fire hazards.
Outlines safe practices for battery replacement, including personal protection and terminal handling.
Covers warnings about servicing, installation environment, and battery circuit risks.
Identifies the power switch, LEDs, and receptacles on the top of the UPS units.
Details the AC input, breaker, and modem/phone line surge protection on the side.
Instructions for inspecting the UPS unit for damage after unboxing.
Guidelines for installing the UPS in a protected environment with adequate airflow and controlled conditions.
Steps for charging the UPS battery for 8-10 hours before initial use.
How to connect computer equipment to the battery-backed receptacles.
Connects peripherals like printers and scanners to surge-protected outlets.
Guides connecting internet lines to the UPS for surge protection.
Explains how the circuit breaker functions during short circuits and reset.
Instructions for turning the UPS on and off using the power switch.
Describes how to start the UPS using battery power when AC is unavailable.
Detailed steps for safely removing and replacing the UPS batteries.
Details power ratings, input voltage, frequency, and output modes for both models.
Information on battery type, backup time, and recharge time.
Explains LED indicators and audible alarms for different UPS conditions.
Lists the buzzer sounds for battery normal, low, fault, and overload states.
Outlines protection mechanisms like TVSS, overload, and short circuit protection.
Covers dimensions, weight, outlets, operating temperature, and humidity.
Provides solutions for common UPS problems like connectivity and overload.
To Next Page
General
