How to fix a Mustek PM 600 PLUS that won't turn on?
If your Mustek UPS is not turning on, the battery may be disconnected, or there might not be power available at the wall outlet. Ensure the battery is properly connected and that the wall outlet is providing power.
Why is my Mustek PM 600 PLUS runtime so short?
If you're experiencing inadequate runtime with your Mustek UPS, it could be due to a battery that isn't fully charged. To resolve this, charge the unit for at least 4 hours. Another possibility is that the battery is nearing the end of its useful life; as batteries age, their runtime decreases. Consider replacing the battery.
General| Output Power | 360 W |
|---|---|
| Output Waveform | Simulated Sine Wave |
| Battery Capacity | 7 Ah |
| Input Frequency | 50/60 Hz |
| Protection | Overload protection |
Instructions for installing the monitoring software provided with the UPS.
Information on the minimum 1-year warranty and how to contact resellers for specifics.
Guidance on checking the manual and website for troubleshooting UPS issues.
Advice on contacting resellers for service and ensuring qualified technicians perform maintenance.
How to connect the UPS to mains power for charging.
How to connect devices to the UPS output receptacles.
Connecting phone/network lines to the surge protection ports.
Connecting TV antenna or cable to the surge protection port.
Instructions for powering the UPS unit on and off.
How to start the UPS without mains power.
Warnings regarding battery disposal, handling, and risks of electric shock.
To Next Page
