Mutec FS750E - Page 2

Operating Manual
MSBA00049
Date: 21.03.2019
Rev.: 05
Page 2 of 14
Operating Manual FS750E
05
21.03.2019
Update of cable screen, sensor rod diameter and material
J. Scholtyssek
C. Kutschker
A. Wist
04
09.10.2018
Update of cable, sensor rod and earthing connection
C. Kutschker
J. Scholtyssek
A. Wist
03
15.08.2018
Update of product picture
C. Kutschker
J. Scholtyssek
A. Wist
02
29.03.2018
Update of dimension drawing
J. Scholtyssek
C. Kutschker
A.Wist
01
19.12.2017
First Edition
C. Kutschker
J. Scholtyssek
A. Wist
REV
DATE
DESCRIPTION
PRPD
CHKD
APPR
Operating Manual for FS750E
No.: MSBA00049-50
Issue date: 03/2019
Manufacturer:
Mütec Instruments GmbH
Bei den Kämpen 26
21220 Seevetal
Deutschland
Tel.: +49 (0) 4185 8083-0
Fax: +49 (0) 4185 8083-80
E-Mail: info@muetec.de
Internet: www.muetec.de
Copyright © Mütec Instruments GmbH 2019 All rights reserved
This document is copyright protected. It supports the user in making reliable and efficient use
of the unit. Transmission and duplication of this document as well as utilization and disclosure
of its content are prohibited unless expressly permitted. Any breach or infringement shall
result in liability for damages. The software described in this document is licensed and may
only be used and copied in accordance with the terms of the license.
All rights reserved.
Disclaimer
We have checked the content of the printed document for compliance with the described
hardware and software. Nevertheless, deviations cannot be excluded and consequently we
cannot assume any guarantee for complete accordance. The data in this printed document
are checked regularly. Corrections and additions are made in the following version in each
case. We would be grateful for any suggestions for improvement.
© Mütec Instruments GmbH Subject to technical modifications