50˚ max
27
Subject to modications
15. USAGE RECOMMENDATIONS
— Each implement has been designed for a specic use and has its own resistance limits.
— Land clearing and stump pulling are prohibited. This work must be done with specialized machinery and is not
appropriate for the agricultural loader.
— Use the tractor’s driving power to penetrate into the material to be moved rather than speed, which subjects the loader
and tractor to high stresses.
— When the load to be moved is too big, do not force on the hydraulic components. The same applies when the rams are
fully extended. Release the control valve levers.
— For ground levelling, work at slow speed with an implement-to-ground angle of 50° at most.
Workexiblyandcarefully.
To Next Page
Loading...