MX A104 User Manual

30
Subject to modications
18. SAFETY LIFT RAM STOP ON LOADER
1
2
Only supplied in case of specic local safety regulations
(Code of Practice, …).
Important: The lift ram stop must remain permanently
attached to the loader.
Install the lift ram safety stop before carrying out any work
or maintenance operation under the raised loader arms.
Failure to comply could result in death or serious injury.
— Empty loader bucket and place it in fully dumped position
— Raise the loader until the safety ram stop can be
positioned on the lift rod
— Stop the engine
— Install the safety ram stop and strap it onto the lift rod
1
— Slowly lower loader fully down against the safety stop
CAUTION: DO NOT CONTINUE TO LOWER
ONCE IT IS AGAINST THE SAFETY STOP.
— Except for operation under the raised loader arms, install
the ram safety stop as in
2
position.
SAFETY STICKERS
Safetystickershavetobea󰀩xedtotheloader.
The Loader should prominently display pictorial and/or written signs that warn against serious safety risks.
Manufactured by :
19 rue de Rennes - BP 83221 - 35690 Acigné - FRANCE
Tractor model ___________________________
Loader Model ___________________________
Serial Number ___________________________
Counterweight requirement _____________________Kg
Rated Operating Load _________________________Kg
WARNING – DO NOT EXCEED
Date of supply _________________________________
530342
Compliance plate.
WARNING
TO AVOID SERIOUS INJURY OR
DEATH CAUSED BY FALLING
LOADS:
• Load on raised bucket or fork can fall
or roll back onto oprator causing
serious injury or death.
• Use approved clamping and/or guard
attachments for handling large,
loose or shiftable loads such as
bales.
• Carry loads as low as possible.
530344
Do not exceed Rated Operating Load (ROL).
WARNING
CRUSH ZONE
• Install ram safety stop before
working under raised loader
• Lower loader to ground when
parked.
530343
Warning: crush zone.

MX A104 Specifications

General

Brand	MX
Model	A104
Category	Compact Loader
Language	English