14
Subject to modications
6. LOADER UNHITCHING
This operation must be carried out by the driver, who must leave the seat and ensure all
manoeuvres are forbidden while he is working on the loader.
The loader must always be hitched to an implement of at least
100 kg to unhitch it.
— Choose a level and solid surface.
— Lower the loader in double-acting mode until the front axle is
slightly raised, with the implement at on the ground.
— Then actuate in notched oating position. Return to neutral.
With the lifting rams fully lled, exposure to the sun will
restrict any unwanted movement in the loader and ensure
proper hitching.
— Apply the hand brake. Stop the engine.
— Lower the tractor.
— On the left side, pull the unlocking handle downwards.
The locking indicator is in the red zone.
— Lower the left and right parking stands.
Watch the unhitching/hitching video at www.m-x.eu
To Next Page
Loading...